Gigasept pearls

Active oxygen based instrument disinfectant for manual cleaning and disinfection with multi-enzyme formula.Properties:full microbiological efficacy due to synergistic combination of active ingredients with active oxygen (virucidal final disinfection with 2% in 10 min)outstanding cleaning performance due to multi-enzyme formula (protease, lipase and amylase) in combination with a neutral pH value (non-protein-fixing) and high-performance surfactantsExcellent material compatibility, even with sensitive materials such as flexible endoscopesMore user safety thanks to the innovative bead structure -dust-free (therefore no inhalation risk)Innovative packaging system for easy and safe removalSurprisingly pleasant odorApplication areas:Universal cleaning and disinfection of thermostable and thermolabile medical instruments of all kinds. Especially suitable for flexible endoscopes and sensitive materials such as silicone, polycarbonate, polysulfone and acrylic glass. In addition to manual reprocessing, gigasept pearls are also suitable for use in ultrasonic baths.The instrument disinfection granules are diluted with cold water to the desired application concentration.Dosage:Depending on the microbiological efficacy, 1 % - 2 %. The solution is prepared with the enclosed dosing spoon/cup.Application example:10 liters of a 2 % working solution corresponds to 9.8 liters of water and 200 g (200 g = 300 ml) gigasept® pearls. Add water and stir several times during the first 15 minutes after sprinkling in the corresponding amount of granules. After this activation time, the working solution is ready for use. Small undissolved residues do not impair the effectiveness of the working solution, but represent an effective activity depot. Place the endoscopes and instruments to be prepared in the working solution. Ensure complete wetting, also for hollow-body instruments, and allow to act. After reprocessing, rinse/flush the instruments thoroughly with water of at least drinking water quality, preferably with fully demineralized water, to completely remove residues of the working solution. Please observe the reprocessing recommendations of the instrument manufacturers. Do not mix with cleaners or other disinfectants. According to Krinko/BfArM recommendation, cleaning and disinfection must be performed in separate steps.