Ergo Accelerator 1090

ERGO Accelerator, Type 1090, 10 ml
This accelerator has been specially developed to glue parts within seconds at room temperature. Use with Gel ergo.® 1039.
Product instructions:
Depending on the gap, the accelerator ergo.® 1090 has to be applied thinly to one side or on both sides if the gap is bigger than 0.5 mm. The accelerator is 100% reactive and therefore does not require any drying time. Apply the adhesive to just one surface of the component only. If necessary, use a brush or toothed spatula to spread the adhesive evenly in order to completely moisten between the parts. The moistened parts must be joined within 10 minutes!.