Kavan Speed controller KAVAN R-60SB brushless controller 60A SBEC

Programmable microprocessor controller for brushless sensorless motors, designed using modern semiconductor technology. It offers easier and clearer programming with the transmitter and really simple and lightning-fast adjustment by means of the LED programming card KAVAN R (sold separately). It is used to control the speed of brushless electric motors in recreational aircraft models powered by NiCd/NiMH and LiPo/Li-ion batteries. It is equipped with the linear BEC system, which ensures the power supply to the receiver and servos from the drive battery. DESCRIPTION AND FUNCTIONS OF THE CONTROLLER Extremely low internal resistance thanks to the new generation of powerful MOSFET transistors Suitable for most brushless flight motors with power supply from 3-6S LiPo/Li-ion batteries For power supply from NiCd, NiMH, LiPo, Li-ion batteries Linear stabilizer BEC 5,0 V with up to 7 A loadable Adjustable timing for optimal adaptation to the motor Adjustable undervoltage protection - shutdown of the motor in case of undervoltage Safe power-on (prevents the motor from starting when switched on) Temperature-Overload protection against overload (when the temperature reaches 110 degrees, the controller reduces the power) Automatic motor shutdown when the transmitter signal is lost Linear regulation of the throttle Easy programming and adjustment using the transmitter or the LED programming card KAVAN R Calibration of the throttle travel for perfect adaptation to the transmitter signal of your RC set PROGRAMMABLE FUNCTIONS Brake (Off - On) Selectable battery type (Li-poly or NiCd/NiMH) Motor shutdown mode: Motor power reduction or motor shutdown Adjustable undervoltage for motor shutdown - Undervoltage protection against excessive battery discharge. (Lithium batteries: 2.85 V/cell, 3.15 V/cell, 3.3 V/cell NiXX battery: 0%/50%/65% from the initial voltage value) Resetting the controller to factory setting Adjustable timing - for increasing the efficiency and optimal adjustment of the motor - low (3.75 degrees), medium (15 degrees), high (26.25 degrees) Adjustable soft start for motors with gears and helicopters in three stages: normal (300 ms) / soft (1.5 s) / super soft (3 s) PROTECTION FUNCTIONS OF THE CONTROLLER Protection during start-up: If the motor does not start within 2 seconds after the throttle is opened, the controller will stop the motor. Thermal protection: If the temperature of the controller exceeds 110 degrees, the controller limits the output power. Loss of throttle signal: The controller will limit the output power if the signal is missing for 1 second. If the signal is missing for more than 2 seconds, the controller will shut down the engine. Tip: When switching on the controller for the first time, first perform the calibration of the gas path according to the instructions. Only then it is possible to use the regulator and set other parameters with the help of the transmitter or the KAVAN R LED programming card.