Futaba R7006SB FASSTest 2.4GHz 6-ch

The Futaba R7006SB is a compact and lightweight FASST / FASSTest 2.4 GHz receiver with integrated telemetry function. Due to the super slim design, the receiver is perfectly suited for models with narrow fuselages.
6 conventional analogue or digital servos can be connected to outputs 1 to 6. To achieve even shorter response times, the pulse output at the receiver can be shortened to 6.3 ms for digital servos (instead of 16 ms for analog servos).
Up to 18 programmable S.BUS servos or peripheral devices such as gyros, flybarless systems or speed controllers can be connected to the S.BUS output. Digital addressing means that each servo only reacts to information that contains the correct servo address. No more tangled cables, one cable to the wing, for larger models one cable per wing and one cable to the tail. It could not be simpler. This cable-saving and therefore weight-saving method can of course also be achieved with previous analogue or digital standard servos. All you need is a PWM adapter which converts the signal from S.BUS to PWM.
The R7006SB has antenna diversity and constantly checks the signal quality of both antenna inputs. This allows the user to switch to the better input signal at lightning speed and without any transitions.
S.BUS2 sensors can be connected via the S.BUS2 connector and up to 32 telemetry data sets can be transmitted. The telemetry transmitter integrated in the receiver transmits the telemetry data present at the S.BUS2 connection to the FASSTest transmitter, which indicates, announces or acoustically outputs the data on the display.
When connecting the receiver, the receiver battery voltage and the antenna signal strength are automatically transmitted. An additional adapter cable (P-S412) can be used to measure and transmit a further external voltage (e.g. the drive battery up to 70 V).
NOTE: When using 7.4 V LiPo batteries as receiver batteries, the connected servos must also be designed for this voltage. The receiver has no internal voltage converter for the servo voltage!