Amewi Electronics Set for Micro RC Aircraft incl. Gyro Mode 2

Comprehensive complete package for micro models, shockflyers and small gliders. Due to the built-in gyrostabilization, the set fits small 3D models. For beginners, it is also perfectly suited to make the first flight attempts with self-built models. The switchable gyro function supports all flight maneuvers through the position stabilization and almost hides wind influences. In gyro mode, for example, the model can not be stalled, even with full deflections on the transmitter stick, the climb, descent and turn is limited to about 15 °. If the function is deactivated (via a button on the transmitter), loops or rolls are also possible. An additional button on the transmitter also serves as a rescue function to bring the model from an uncontrollable flight attitude into a stable, neutral flight attitude. Features: complete RTR package Mode 2 with transmitter 2.4GHz, 5 channel receiver with gyro and motor control for brushed motors, 2.4Ghz, 2x micro servo + 2x micro servo on the receiver, Y-cable Micro JST, battery 2S LiPo 300mAh JST, USB charging cable Gyro function 3D / 6G switchable 5 fully proportional channels (throttle, altitude, side, 2x aileron) rescue function Dual rate switchable (high and low, servo travel limitation) 2.4GHz system approx. 100 - 150m range Failsafe (in case of e.g. LiPo Safe shutdown soft (reduces power when battery is low) Technical data: Transmitter: 2.4GHz 6 channel Dimensions receiver board LxWxH: 32 x 25 x 18mm Weight: 10g Motor connection: for brushed motors with Micro JST connector 2-pin Dimensions extra servo LxWxH: 11 x 15 x 3mm Weight: 2g Actuating force approx. 150g Battery: 300mAh 2S 7,4V LxWxH: 40 x 14 x 10mm Weight: 16g Included in delivery: Transmitter 2,4GHz Receiver incl. Gyro and 2 Micro Servos 2x Extra micro Servo Y-Cable micro JST Battery LiPo 300mAh 2S 7,4V JST USB Charging cable Is still needed: 4x Batteries Mignon 1,5V for transmitter.