Futaba Servo HPS CB700 Car 0.07s/49.0kg

The Futaba HPS-CB700 is the new most powerful RC car servo ever. 49 kgcm torque and 0.07 sec/60° actuation time at 7.4V are a clear statement. In addition, a new HPS brushless motor has been developed that stays much cooler in operation. Likewise, the power consumption is significantly lower than before. The new all-aluminum housing has a size of 40.5 x 21 x 37.7 mm. The servo is fully compatible for the SR mode of the T7XC & T7PX! Programmable by S.BUS2 technology! Of course all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The servos can be addressed in different ways: 1. via the S.BUS receiver 2. with the handy programmer SBC-1 3. via the PC-Link softwarewith the USB adapter CIU-2 4. at the S.BUS connector of the transmitter The following parameters can be configured: - S.BUS channel assignment - Servo reverse polarity - Servo type (normal / retractable) - Soft start (on / off) - Mode selection on signal failure Hold or Free - Soft servo run (on / off) - Servo position (servo tester) - Servo center adjustment +/- 300 µs (approx. 30 degrees) - Servo speed, 0.39...9 seconds per 45 degrees - Deadband adjustment (deadband) - Servo travel adjustment left and right separately, approx. 50...175% - Starting force - Damping - Holding force - ID storage FEATURES - Powerful S.BUS2 digital servo with metal housing and metal gearbox - Hi-Voltage - T-FHSS SR compatible - Ball bearing - High resolution - High return accuracy - Low wear potentiometer - Water protected.